is pro false - pro_percentage: 0 - price_adjust: 100 - price: - msrp price:

Fleece is one of the most versatile pieces in a hiker’s layering system. It’s lightweight, breathable, and provides reliable insulation without weighing you down.

Welcome to the OR 25/26 Winter Outerwear Line-Up, featuring weatherproof, breathable, and performance-first ski and snowboard kits. We know choosing the right gear matters, which is why we’ve gathered real feedback from outdoor experts, athletes, and mountain professionals who’ve put these pieces to the test.

The down fill rating number is a measurement of down quality, meaning the cubic inches of loft one ounce of the specific down produces. A higher rating means less down fill is required to capture the same amount of heat.

This past summer, a group of young women ages 17 to 22 embarked on a journey few ever dream of, a 40-day canoe expedition along Canada’s Coppermine River, beyond the Arctic Circle.

Washington is an outdoor playground—national parks, wild beaches, endless trails, ski resorts, rivers, and forests stacked into one state. You could spend a lifetime here and still not scratch the surface. Whether it’s your final road trip stop or just a waypoint on the way to B.C., Alaska, or down the Pacific Coast, Washington delivers year-round adventure.

One of the best ways to celebrate National Dog Day is by hitting the trails with your pup. Whether it’s a leisurely stroll or a challenging hike, your dog will love exploring new sights and scents. Gear up and have fun celebrating your favorite furry friend. Don’t forget the water bowl and the UPF gear for yourself!

In 2024, Ali Becker and Mathieu Leblanc set out to tackle the freshly released Great Northern Bikepacking Route, now the world’s longest mapped off-road bikepacking route.

Some spend their whole lives searching for their roots—a place to connect, a place to call home.

How to stay cool, protected, and safe during hot weather runs.

Starting a new sport, can bring a mix of excitement and a bit of intimidation all at the same time.

Sun protection is a year-round endeavor. Ideally, you should wear sunscreen and other forms of sun protection when you spend time outdoors, no matter the time of year.

At Outdoor Research, our goal is to provide our customers with elite outdoor apparel through sustainable material sourcing and business practices.

“Same Outdoors, Different Mission” isn’t just a campaign tagline—it speaks to what defines our purpose. While we typically say it within the context of combating the same elements with gear tailored to a tactical mission set, we also like to use it proudly to describe our commitment to supporting veterans who have put the uniform away and want to continue seeking other goals. Highlighting the same landscapes and backdrops that once tested mission timelines and resolve, and showcase it as a space for reflection, healing, and clarity for what comes next.   This Veterans Day, we sat down with our partners at Warrior Expeditions to learn more about how they help veterans navigate the disorienting transition from wartime experiences to a civilian world that can feel far removed from the one they once knew.   We had the pleasure of speaking with Michelle Revoir – a United States Air Force Veteran who served 11 years with deployments to Iraq and Afghanistan and now serves as Director of Development at Warrior Expeditions.     OR: Tell us a little about how you got here and your role/background. Michelle: I thru-hiked the Appalachian Trail with Warrior Expeditions in 2015, prototyped the Mountains to Sea Trail for them in 2016, and became their Director of Development in 2017 after completing a source to sea paddle on the Mississippi River. Before my AT hike, I served 11 years in the Air Force, most of which was as a combat cameraman.       OR: Warrior Expeditions was founded on the idea of ‘walking off the war’ - a perspective lost with modern veterans who are often back home mere days after leaving combat zones with little time to decompress. Can you talk about how that early concept became your model for healing and reintegration?  Michelle: Earl Shaffer was the first person to hike the Appalachian Trail from Georgia to Maine in one go. Our founder and CEO, Sean Gobin, was inspired by his trek and Shaffer’s idea of “walking off the war.” Sean realized the therapeutic value he got from the thru-hike and decided to create a program for combat veterans based on this. The transition from combat to home life is abrupt and pretty much non existent for today’s veterans. These long expeditions give us a chance to really process our combat experience by removing everyday stresses while being in nature.     OR: Each expedition you offer - whether it’s the bike, hike, or paddle programs - asks veterans to immerse themselves in the elements for months—covering thousands of miles. Can you go into more detail about each program.  Michelle: We currently offer three programs, hiking the Appalachian Trail, biking the Great American Rail Trail, and paddling the Mississippi River.   Sean started the program with only the Appalachian Trail as an option - a 2,197 mile foot trail from Georgia to Maine. Starting in Georgia, we meet the veterans and shadow them to their first trail town in Blairsville, GA, where we part ways for them to “hike their own hike.” This is our longest expedition, taking the veterans 5-6 months to complete.   Realizing that some veterans couldn’t hike, or didn’t want to hike, Sean added a cycling expedition. The veterans ride the 3,700 mile Great American Rail Trail for approximately 3 months, starting in Washington D.C. and ending in Washington State.   Then in an effort to accommodate veterans who couldn’t hike or bike, he added the paddle program. A source to sea paddle on the Mississippi River is 2,340 miles, so approximately 3 months of paddling, so it was a perfect addition.   Each program is fundamentally the same: Eat, sleep, hike/bike/ paddle, repeat!    OR: What have you found time in the backcountry unlocks that traditional therapy or reintegration programs struggle with?  Michelle: Traditional therapy for veterans typically includes talk therapy and medication. These methods are definitely helpful for some veterans, but unfortunately not for all. Being in the outdoors for an extended period and the repetitiveness of an activity allows your mind to reflect on those experiences you would otherwise avoid. At least that is how it was for me. The expeditions are not a cure, but more of a reset. For me, being out there is a reset that helps me get through daily life.       OR: When you’re out for months facing unpredictable conditions, gear isn’t just comfort—it’s survival. That reality isn’t foreign for veterans who similarly relied on their gear in their prior profession. How did having the right layers, systems, and technical apparel support you or your team’s success during these expeditions?  Michelle: The right gear is extremely important for these types of trips. There’s nothing “comfortable” about being outdoors for weeks on end, it’s more about being comfortable with being uncomfortable. That being said, the right gear can definitely make it more enjoyable. It’s hard to reset your brain if you’re busy fixing broken gear, getting blisters from the wrong shoes, or have clothes that don’t dry out fast enough. The best quote I ever heard about this was from an 80 year old woman at a ski resort who I complained about the weather to. She said, “There’s no bad weather hunny, only bad clothing choices.”    OR: We have a similar saying around here! Your program relies on more than just the healing power of nature, it’s the network of local communities and fellow veterans that sustain the journey and make the impact stick. What have you learned about the power of connection and shared purpose through the warrior expeditions model?  Michelle: One misconception about our program is that the veterans are out in the backcountry foraging for food and not showering for months. In reality, on trips like these, you’re only away from civilization for a few days at a time. We assist our participants with logistical help by coordinating with local trail angels, veteran organizations, and others along each trail. They provide transportation, lodging, and assist with resupply as needed. This can be a real challenge for many of our veterans, particularly at the beginning of their trip. Accepting the help of a stranger with no strings attached is hard. But by the end of the trip, they realize that there are just simply good people in the world.      OR: Warrior Expeditions has helped hundreds of veterans rebuild confidence and purpose through these journeys. As you look toward the future, how do you see the mission evolving, and where can partners like Outdoor Research continue to make the biggest impact?  Michelle: Our partnerships are a huge reason why we can provide these programs to so many veterans. By providing appropriate gear for the veterans through partners like Outdoor Research, we’ll be able to stay on our current course with three expeditions and between 30-40 participants annually. I cannot express enough how invaluable these partnerships are and how deeply grateful we are for your support.     OR: We’re happy to just be a small part of the journey. Thank you for all that you do for our community! We look forward to seeing how it all grows in the coming years.  >>> Learn More about Warrior Expeditions >>> Explore OR Tactical  

Welcome to the OR 25/26 Winter Outerwear Line-Up, featuring weatherproof, breathable, and performance-first ski and snowboard kits. We know choosing the right gear matters, which is why we’ve gathered real feedback from outdoor experts, athletes, and mountain professionals who’ve put these pieces to the test. Their firsthand insights will help give you the confidence to find the outerwear kit that fits your riding style and the conditions you face most. Expert Reviews: Insights from the Field Outdoor Research products are reviewed and tested by ExpertVoice, a platform that connects brands with verified industry experts — including retail associates, professionals, and passionate adventurers to build brand advocacy and product trust. Their trusted feedback can help guide you toward the best ski and snowboard gear for your performance, comfort, and style needs this winter.  The Limited Edition Cloudchaser Kit: Women's Cloudchaser 3L Jacket: "The Cloudchaser 3L Pertex jacket is lightweight and breathable, with a nice feel that was softer and quieter than Gore-Tex. The sizing was roomy but not oversized, it was easy to fit my big puffy under the jacket. I think this kit would be best for someone who needs one outfit to take them from the resort to the sidecountry to the backcountry." - Emily Bettin, McCall, ID Women's Cloudchaser 3L Bibs: "These bibs are excellent for ski touring due to the light and flexible fabric they are made of." - Kathryn Dove, Snoqualmie, WA Men's Cloudchaser 3L Jacket: "This jacket is a hard shell with a softshell feeling. It's nice and stretchy, soft, and generally breathable. Other features include one left zippered chest pocket, bilateral armpit zips, powder skirt, helmet compatible hood with cinches at the back of the head and face, sealed zippers and taped seams, velcro wrist cinches, internal left pocket for gloves, 2 external zippered hand pockets, and a loop on both the inside and outside of the jacket for hanging." - Adam Figuracion, Achorage, AK Men's Cloudchaser 3L Bibs: “Well designed bib with a stretchy fabric that moves well with ski touring. The vents are ample length to let out excess heat. I spent about 25 days touring in them both in the Rockies and back east in varied weather conditions. The water repellant was sufficient for even dense snowfall." - Kevin Quinn, Morrison, CO >>> Shop Cloudchaser Collection   The Hemispheres Team Kit Men's Hemispheres Team Gore-Tex 3L Jacket: "The shell remains a high quality & durable fabric- even while running alpine gates or darting through backcountry trees, I don't have any scrapes on these. The combo between breathability, waterproofness, and windproofness was good as well." - Connor Perkett, Salt Lake City, Utah Men's Hemispheres Team Gore-Tex 3L Bibs: "I'm impressed by how well they held up to both scraping on fallen trees while touring and scraping freshly-sharpened edges while hauling racers. The massive side vents were big enough to remove mid-layers without taking off the bibs, in addition to serving as great vents. " - Alex Ames, Los Alamos, NM Women's Hemispheres Team Gore-Tex 3L Jacket: "This shell has quickly become my favorite. It is light, dry, and vents well. I've worn this jacket on backcountry adventures where it has dumped snow, and on sunny days on resort and it has held its own well." - Kelsey Dunn, Basalt, CO Women's Hemispheres Team Gore-Tex 3L Bibs: "These bibs were my go-to this winter for both in-bounds skiing & backcountry, and as a ski patroller, you are out there no matter the conditions. I live in the Inland NW where it's either dumping, negative temps, liquid precip, or the occasional blue sky. These bibs held up! They kept me warm with just a base layer and with the side vents, it was easy to expel heat during climbs." - Natalie Sprigg, Spokane, WA >>> Shop Hemispheres Collection     The All-New Powderverse Kit Women's Powderverse Jacket: "This is an insulated jacket so it has extra padding around the back/chest area. It's perfect for the colder days on the mountain, I wore it many days ranging from 30 to -5 degrees! Kept me so warm but also was breezy with the huge vents whenever I needed to cool down after a hike or tiring run." - Radhi Ladd, Arvada, CO Women's Powderverse Pants: "Functional comfort for all day in the mountains! These pants were great for recreating in cold and snowy conditions. I was able to take it multiple times downhill skiing and snowshoeing this winter through a variety of conditions. I found it to be great at keeping me warm with the insulation that is built in. The fabric allows you to move freely and includes belt loops with some straps to help synch down." - Britt McCracken, Lafayette, CO Men's Powderverse Jacket: "I wore this jacket mostly for days inbounds at the resort this season, and it excelled in nearly every way. Throughout the season I was faced with weather from the negative teens (Fahrenheit) to the high 40’s, but with space for layers and good ventilation or tight cinching, the jacket handled it all. The material is durable and comfortable, the jacket is warm but not too warm, the vents are well placed and easy to access with gloves on." - Sebastian Wallach, Bentonville, AR Men's Powderverse Pants: "This was also my first time opting for ski pants instead of bibs, and I was pleasantly surprised by how well they performed. They offered plenty of mobility, stayed in place without issues, and handled everything from deep powder to wet conditions with ease. The fit was spot-on and they proved to be a great alternative to bibs. Outdoor Research nailed it with this setup." - Nolan Sawtelle, Eagle, CO >>> Shop Powderverse Collection     Choosing Your Ski and Snowboard Kit This Season Whether you're tackling icy resorts or exploring powdery backcountry trails, Outdoor Research gear is tested by trusted experts to perform in the most demanding conditions. Every test helps us enhance performance, durability, and comfort, giving you confidence that your outerwear is built to handle whatever the mountain throws your way. Backed by years of innovation and experience, our gear not only meets but exceeds expectations, ensuring your journey is safe, exhilarating, and unforgettable. >>> Shop Ski and Snowboard Gear   Reviews and Photos from ExpertVoice 

“Overall, our approach is that we say yes to the customer first and then get after solving the problems at hand” – Alex Rodero, Sr. Director of Operations. For over 30 years, OR has been leveraging our deep expertise across product development, design, engineering, and manufacturing, to build strong partnerships with the U.S. government and NATO allies—earning a reputation as a trusted and premier manufacturing partner.  Today, we’re speaking with Feng He, Director of Manufacturing, who oversees both U.S. factories, and Alex Rodero, Senior Director of Operations. With more than 25 years at OR each, they are key leaders and long-standing pillars of the brand.    OR: Tell us about your roles here at Outdoor Research and how you found your way into this industry.  Feng: As the Director of Manufacturing, I am responsible for running both of our factories in Seattle and California effectively and efficiently. This includes budgeting, hiring personnel, providing delivery timelines, product costing, and new product developments. Coming from a family with some manufacturing background definitely paved my way into the industry.   Alex: As the Senior Director of Supply Chain and Operations for our Tactical business, I am responsible for the oversight of the product, financial planning, and upstream relationships with material suppliers that support our manufacturing operations. As you can imagine, that is quite a range of responsibilities, but it is built on having worked in all those areas over the course of my 20+ year career here at Outdoor Research. While I started out chasing the allure of working in the outdoor industry, it’s been the connection to the manufacturing that has shaped my career and enriched my experience. Having been intimately involved in the product design and production cycles was incredibly beneficial towards understanding, influencing, and directing the strategy side of the business in my current role.       OR: What value and role does OR play from the perspective of the U.S. government/military—both as a manufacturer and as a strategic advisor on gear and capability needs?   Alex: Outdoor Research has a strong legacy built on creating products that solve real-world problems outdoors. That mentality was a core tenant of our founder’s ethos for outdoor pursuits, but it also led to elite military end users seeking out our products when their issued gear was not up to task. We have a long history of being experts in extremely cold weather - particularly in handwear. From those first engagements with the special forces communities, to developing and supplying large scale gloves systems for the Army, Marine Corps, and now the Air Force, we are looked at as trusted partners that provide products and expertise in support of the men and women who serve in extreme conditions.   We have a long history of being experts in extreme cold weather operations - particularly in handwear - but beyond our environmental insight, we are unique in that we wholly own our manufacturing operations- most brands don’t and must subcontract to other partners. By controlling our own manufacturing ops, we can develop, test, prototype, and scale to manufacturing faster than any of our competition. This is what truly differentiates us.      OR: Can you walk me through your current production workflow from raw material intake to testing and final inspection?   Feng: We make mostly 100% Berry Compliant products in both factories. Our production flows from materials ordered from USA vendors, getting that processed into our factories, and then released to cutting, sewing, and final packaging. Throughout the sewing process, we have various quality control gates to ensure that products meet our customers’ quality standards and perform AQL tests for each final production batch as one last check before packaging and shipping to our customers.   OR: With strict sourcing rules for Berry compliance, how do you navigate supply chain disruptions while ensuring the military gets what it needs, when it needs it? How do you manage and track corrective actions when a quality issue is found—either internally or reported from the field?  Alex: The Berry Amendment requires that materials and products be made wholly in the US, so it can be a narrow supply chain which at times can be difficult to manage if disruptions occur. This is exacerbated by the fact that the government is not the best partner when it comes to planning- they are very reactive in how they manage procurement of OCIE (military gear and clothing products). Occasionally, there are larger scale programs that allow us to better plan and deliver on a regular cadence, but more often, the customer base – due to the nature of their job - wants product asap. With that, we do our best to plan stocks of material and finished goods to allow for some fluctuations in that asap business, which in turn keeps the factory production flowing and efficient. It’s a balancing act.   With respect to quality concerns, there are stringent standards in place in our manufacturing operations to ensure all products are compliant and meet both our standards and the specs imposed by the government. For example, when making waterproof products, we test every item multiple times throughout the process to ensure there is no leakage. The end user simply cannot afford to have a garment or pair of gloves they are relying on in extreme cold or wet weather to fail. Failure could result in real consequences, so we take the quality control and assurance protocols very seriously. If any faults do pop up while in the field, wholly owning our own manufacturing process allows us to correct and adapt quicker than anybody in the industry.   OR: How do you manage production scaling when a contract ramps up unexpectedly?  Feng: Managing production scaling – up and down - is always a challenge. We rely heavily on running overtime because hiring new employees and getting them up to speed is very difficult. We also have the second factory in California which gives us more flexibility and opportunity to ramp up production as needed. OR: Tell us about a time you had to pivot or adapt under an extreme timeline or contract pressure.   Feng: We got a contract order to deliver 150,000 sets of gloves within 12 months in 2018. At that point, we only had our Seattle factory running and it would have been impossible to meet that delivery timeline with just overtime and quick hiring. We quickly came to the decision to open a new factory in California - where the workforce and sewing skills were much more readily available. We went through the arduous process of finding a place to set up machinery, hiring and training employees in a matter of a few months. It taught our whole team a lot about how to communicate between factories better and how to handle the challenges of growth. Alex: As Feng said, that was truly a great feat for our team to accomplish- establishing a new manufacturing facility is a legit undertaking- and to do it for products requiring waterproof quality standards added to the stress of the situation. Overall, our approach is that we say yes to the customer first and then get after solving the problems at hand. It results in a very dynamic, high-paced work environment, which means there’s never a dull moment around here. There’re always new challenges, new problems posed by end users, new materials and innovative ideas to grind on. These are the things that make it interesting!      OR: We’re quite proud of our factory workforce. They are skilled operators doing intricate work that requires years of experience to master. How do you train and retain skilled operators & technicians in a high-stakes, compliance-driven environment? Feng: We are very proud of our workforce and value their contributions to our success in serving our government customers. We are thankful that we have been able to retain our skilled operators partly because we respect them and have been able to provide a great working environment for them. They have been a fixture throughout all the growth and changes OR has been through in the last couple of decades. We have a very diverse workforce with different cultural backgrounds and our willingness to learn to understand and respect those differences makes a difference to our employees.   OR: If you could improve one aspect of tactical gear manufacturing for the U.S. government, what would it be and why?  Alex: I think the most difficult challenge with manufacturing gear for the US military is that they are not the best planners and do not give us forecasts. They are the first to tell us this, but it does make it difficult to sustain efficient manufacturing operations. I push on this all the time, but with the challenges around federal budgeting, funding allocations in the defense budget specifically, and regular changeover in government leadership & procurement offices, it’s quite difficult to get a rhythm established. That said, we’ve had some good years recently, and we continue to develop new products with new innovative materials and feel we are well positioned to continue to be a strong partner for our military for years to come.  >> Explore Tactical  

Fleece is one of the most versatile pieces in a hiker’s layering system. It’s lightweight, breathable, and provides reliable insulation without weighing you down. “We want hikers to feel comfortable and confident knowing they can depend on our gear,” explains OR Product Manager, Sportswear, Jessica Hargett. The key is knowing how to use fleece within your layers so you can adapt to changing conditions.  Why Every Hiker Needs a Fleece Jacket Known for its lightweight and breathable qualities, fleece jackets for hiking provide warmth without the bulk, making it an ideal choice for layering in various weather conditions. The fabric traps body heat efficiently while allowing moisture to evaporate, keeping you comfortable and dry during both high-energy activities and leisurely pursuits. Its versatility is further enhanced by its softness and flexibility, ensuring ease of movement whether worn alone or as part of a multi-layered outfit. The material is often used in mid-layers, providing insulation between a base layer and an outer shell.    “Fleece brings value to our offering as it delivers a great warmth-to-weight ratio, is easy to care for compared to insulated jackets, and it can act as both a versatile midlayer or a standalone piece for a range of end uses and weather conditions. Depending on the fabrication, it can also be worn year-round,” – Jessica Hargett. “At Outdoor Research, our fleece collections—like the Trail Mix, Vigor, Grayland, and Crescent are designed specifically for this balance of comfort and performance. Each option works perfectly as a mid-layer in cold conditions or a stand-alone jacket in dry, cool weather. Unlike generic fleece, OR fleece is purpose-built and engineered through the lens of function and performance offering advanced moisture management, breathability and warmth in contemporary, versatile silhouettes and designs,” – Jessica Hargett.  The Purpose of a Fleece Jacket Fleece jackets are an essential layer for hikers, offering reliable warmth and comfort on the trail. Their primary function is warmth, fleece traps body heat, keeping you warm during chilly hikes or early morning starts. Beyond warmth, fleece material is effective at wicking moisture, helping to pull sweat away from your skin so you stay dry even during strenuous activity. This combination of lightweight insulation and moisture management makes fleece jackets an ideal choice for hiking in variable weather conditions.  The Basics of Layering for Hiking  The classic layering system has three parts:  1. Base Layer (next to skin): Wicks sweat away to keep you dry.  2. Mid Layer (insulation): Traps body heat to keep you warm.  3. Outer Layer (shell): Shields you from wind, rain, and snow.  Fleece is typically your mid layer, though it can also work as an outer layer in mild, dry conditions.      How to Layer Fleece for Cold-Weather Hiking  The foundation of your layering system should always be a moisture-wicking base layer. Once your base layer is in place, add your fleece mid layer. A zip-up fleece works well for regulating body temperature since you can easily vent when moving uphill, while a pullover design locks in warmth during rest stops or slower-paced sections of the hike.  Your outermost layer should be a protective shell, either windproof or waterproof depending on the forecast. This layer helps prevent heat loss and shields you from wind, snow, or rain. As you hike, remember to adjust as needed. Cold-weather hiking generates heat quickly, so don’t hesitate to unzip your fleece or shed a layer when you’re working hard, then add it back on when you stop to rest.  Pro Tips for Fleece Layering Because conditions on the trail can change in an instant, it’s smart to pack a backup insulating layer, whether that’s an extra fleece or a lightweight puffy. Fit also plays a key role in comfort and performance: your fleece should layer comfortably over your base layer without being so bulky that your shell won’t fit on top. Finally, pay attention to features. Details like thumbholes, hoods, and zippered pockets can add warmth, protection, and utility, making your fleece even more functional for long days outdoors.  Why Fleece Works So Well Fleece remains a staple for cold-weather hiking because of its versatility. It continues to insulate even when damp, dries quickly, and layers easily with other pieces. “It’s that adaptable layer that bridges warmth, breathability, and comfort. Whether a standalone piece or a part of a broader layering system, fleece can be incredibly versatile and perform across a range of activities and conditions," – Jessica Hargett. Fleece is more than just a cozy layer, it strikes the perfect balance of warmth, breathability, and comfort, making it a trusted option for hikers facing unpredictable conditions in the colder months.   >>> Shop Fleece Collection >>> Shop Women's Fleece >>> Shop Men's Fleece

This past summer, a group of young women ages 17 to 22 embarked on a journey few ever dream of, a 40-day canoe expedition along Canada’s Coppermine River, beyond the Arctic Circle. Guided by leaders from Camp Widjiwagan in Minnesota, they navigated whitewater rapids, carried their canoes across long portages, and adapted to the shifting moods of the northern wilderness. Along the way, they built resilience, teamwork, and memories to last a lifetime.  Outdoor Research proudly partnered with the group, equipping the women with rain jackets and rain pants to help them stay dry, warm, and protected through every paddle stroke. We eagerly awaited their return to hear the stories from the boat and beyond. From grueling portages to surreal views of the Arctic Ocean, their reflections revealed the joy, challenges, and personal transformations that came from pushing yourself beyond the comfort zone. And as we learned from their story by making this journey by canoe meant their success truly hinged on teamwork. We are proud of their story and honored to be able to share some of their highlights.   Meet Some of the Team  Flannery McGreevy – Guide, Senior at the University of Hawaii Manoa in Global Environmental Science Daphne Cooper – Camper, Freshman at the University of Vermont Marjorie Borer Seabloom – Camper, Freshman at Grinnell College Vivian Turback – Camper, Freshman at Loyola Chicago University in Nursing    Photo by Melissa Brand.   Before the Trip: Planning & Anticipation  Flannery McGreevy (Guide): “I got the call about this trip in February and was immediately excited. At Widji, we call this kind of expedition a ‘Voyageur’ trip—it’s rare, remote, and demanding. I knew it would be a once-in-a-lifetime experience.”  Preparing for the journey required months of logistics, from food planning (think 760 tortillas and 252 cups of oats) to repairing tents and canoes. “We had 40 days of food, about 800 pounds total,” Flannery recalls. “The sheer scale of prep was mind-blowing.”  For Marjorie, the anticipation had been years in the making: “My brother told me about this type of trip almost ten years ago, and it became a personal goal. I was excited for the adventure and nervous about whether I could keep up with the challenge.”  Vivian summed up her feelings before the trip: “So many nerves, so much excitement, and even fear. But I reminded myself—it’s something that would change my life.”  On the Water: Challenges, Awe, and Teamwork  A Typical Day Most days meant 12–14 hours of paddling, portaging, or both. With the midnight sun overhead, the group even flipped schedules to paddle at night when the wind was calmer. Meals were quick, and layover days were almost nonexistent.  The Hardest Moments Flannery recalls the brutal triple-portages of week one: “By the end of a 1-mile portage, we’d each walked six miles with heavy packs. There were tears, but also pride.”  Vivian found her greatest challenges were mental: “Sometimes I’d think, ‘I can’t keep going.’ But 9 out of 10 times it was just a mental game. With encouragement and laughter from the group, I got through it.”  Daphne remembers “bug week,” when swarms of black flies tested everyone’s patience. Yet even those low points became part of the bond that carried them through.  Joyful & Awe-Filled Moments Running whitewater brought both fear and thrill. “Gliding past huge rocks and waves threatening to tip us—it was a rush like nothing else,” said Daphne.  Marjorie’s moment of awe came when the group rounded a bend into the Canyon section: “The red cliffs on either side were breathtaking, with a patch of blue sky breaking through. It felt like another world.”  For Flannery, the most unforgettable view was reaching the Arctic Ocean itself. “After weeks of hard work, seeing that horizon felt surreal. We had made it.”  Teamwork Above All Every participant emphasized teamwork as the key to success. “Canoeing is inherently a team activity,” Flannery explains. “I couldn’t have done this journey alone.”  Marjorie agreed: “From communication during rapids to simply offering encouragement, teamwork was essential.”    Photos by Flannery McGreevy. Unexpected Moments & Lessons Learned  The river offered plenty of surprises. On day one of whitewater, a canoe pinned against a rock forced Flannery into rushing water to push it free—“like a mom lifting a car off her baby.” Later, navigating blind through a canyon of 100-foot cliffs left the group both shaken and proud: they ran it clean, never swamping a boat.  Marjorie recalls getting stuck on a shallow rock mid-rapid. “It was frustrating in the moment, but later it became one of the funniest stories we told.”  Through it all, they built new skills—from repairing packboats with duct tape to mastering new paddling techniques like “Mother Ducky,” a pod-formation style that let them run long rapids together.  Most importantly, they discovered strength within themselves. “I learned I can do hard things—and stay positive while doing them,” Flannery reflects. Vivian adds, “After this trip, I truly feel I can accomplish anything.”  After the Expedition: Reflections & Takeaways  Vivian: “Honestly, it was heartbreaking. I never wanted to leave the girls who had become my family. The end was surreal—after so much anticipation, all of a sudden it was over.”  Daphne: “Without the obstacles—the bugs, the portages, the rapids—the highs wouldn’t have been so rewarding. The strength and trust we built are what made the trip.”  Marjorie: “When I got home, the first thing I did was eat fresh corn. But the memory that will stay with me is seeing the Arctic Ocean for the first time. It was accomplishment, awe, and sadness all at once.”  Flannery: “We celebrated back at camp with family, friends, and real food—meat, fruits, veggies. It was the perfect way to end.”  Would they do it again? Every single one answered yes—with minor adjustments: better boots, more coffee, and, as Vivian added with a laugh, “definitely more underwear.”    Photos by Flannery McGreevy. Closing Thoughts  Journeys like this go far beyond the miles traveled. They’re about testing limits, relying on teammates, and finding joy (and let’s be honest laughing at times at the situations we decide to put ourselves in). With the right gear, preparation, and spirit, these young women paddled through challenges few encounter and returned even physically and mentally stronger. Thanks for including us in your journey, we are truly inspired!  >> Shop the Aspire 3L Rain Jacket and Rain Pants.     

Washington is an outdoor playground—national parks, wild beaches, endless trails, ski resorts, rivers, and forests stacked into one state. You could spend a lifetime here and still not scratch the surface. Whether it’s your final road trip stop or just a waypoint on the way to B.C., Alaska, or down the Pacific Coast, Washington delivers year-round adventure. Bike, hike, climb, surf, or ski—whatever your thing is, you’ll find it here. We know The Evergreen State better than most, so here’s our guide to the heavy hitters and can’t-miss spots, no matter which direction you’re rolling in from. And if you need a soundtrack for the drive, OR Athlete Micah Evangelista’s got you covered with his PNW-inspired OR Road Trip Spotify playlist.     Mountain Biking Washington's riding is world-class—diverse terrain, endless trail networks, and a friendly, welcoming scene. Our Freewheel MTB Collection has everything you need to take on Washington’s finest trails. Galbraith Mountain [North/Bellingham]: If you don't know about Galby yet, you’re in for a treat. The trail count is ridiculous, and the build quality is top-notch. Midweek rides mean fewer people; weekends can get busy. Post-ride beers at Kulshan Brewing or a coffee at Cafe Blue are basically mandatory. Raging River / Tiger Mountain [Central/Seattle]: Seattle's after-work training ground. Raging's Poppin' Tops → Flow State lap is pure fun; Tiger's Predator is one of the most legit steep tech descents in the area. Late spring and early fall are prime time. Carpool if you can. Duthie Hill Bike Park [Central/Seattle]: Where riders of all ages cut their teeth. You can literally progress from your first berm to tabletops in the same evening. Start on Bootcamp, then move to Ryan's Eternal Flow, and eventually, if you're feeling spicy, TQ or Voodoo Child. Summer evenings here are gold. Leavenworth [North]: Small trail network, massive scenery. Freund Canyon delivers views for days; Rosy Boa is a twisty flow gem. Bring more water than you think you'll need—it bakes out here—and end the ride with a brat and beer at München Haus. Port Angeles / Dry Hill [West/Kitsap Peninsula]: Tech downhill with a view of the Strait of Juan de Fuca. You might want a full face and pads here. Shuttles run during certain events, but most days you'll pedal. The ferry ride over is half the fun—just don't miss the last boat home. East Side [East/Spokane]: Drier, sunnier, and a great shoulder-season escape. Sun Mountain is mellow XC; Buck Mountain feels remote. Beacon Hill in Spokane is a local favorite for rocky, rowdy lines—and it rides earlier in spring than anywhere west of the Cascades. Pro Tip: Most of these trails ride year-round, but west side roots are slick in winter. Trailforks is your best friend.     Volcano Skiing / Climbing Washington is home to five stratovolcanoes, offering endless routes and year-round snow. But these aren't casual hikes—although the snow melts out on many routes during the summer, glacier travel, crevasse rescue, and solid navigation skills are usually mandatory. Our Snow, Sun, and Alpine Collection has the layers you need to dial in your kit before you head out. Mt. Baker [North]: Big snowpack, technical routes. The Coleman–Deming route is the classic, but there's routes on every aspect. Late spring brings corn harvest. One of the best places to fine-tune your glacier travel skills. Glacier Peak [North]: The most remote of the five—18 miles to the top from the nearest trailhead. Most make it a 2-3 day mission. This one offers solitude and summit views you won't forget. Mt. Rainier [Central]: The heavyweight. Even if you never summit, spending time in Rainier's alpine is worth it. The DC and Emmons routes are the most climbed, and Fuhrer Finger is THE ski descent when conditions allow. Mt. St. Helens [South]: Best in late winter/early spring for smooth corn turns. Crater rim views are unreal—just mind those overhanging cornices. Permits are required and can be hard to snag on a Saturday. Mt. Adams [South]: Home of the SW Chutes—3,500 feet of sustained 30° corn skiing. The standard route up the southern flank is a long but straightforward climb. Start early to beat the heat and time the corn cycle. Pro Tip: Avalanche skills are just as important as glacier travel know-how here. Always check the NWAC site or app, and be ready to back off if the weather turns.     Surfing Washington surf is more about the adventure than perfect barrels. Think 5/4 with hood, gloves, and booties—even in August. Our Sun Protection Collection is stocked with the gear you’ll want before and after you change into your wetsuit. Olympic Peninsula [North]: Hobuck is beginner-friendly and mellow; La Push has more punch and a tighter lineup. Swell windows are short, so watch the forecast closely. Westport [Central]: The state's most consistent break thanks to the jetty. Summer crowds are real, winter brings the best swell. Capt’n Jack’s is your coffee warm-up spot. Long Beach [South]: Miles of forgiving whitewater for beginners, but rips are no joke here. Best in small summer swells with light wind. Pro Tip: Local surf shops in Westport rent complete setups if you left your gear at home.     Rock Climbing From roadside crags to big alpine routes, Washington climbing offers something for every style of climber. Check out our Alpine, Sun, and Hike Collection for harness-friendly and insulating alpine layers built for the climbing life. Sport Climbing / Bouldering: Vantage [Central, East] offers sun when the west side's socked in; Leavenworth's Icicle Creek [North] has both sport and legendary granite boulders. Exit 38 [Central/Seattle] is Seattle's quick-hit crag. Flyboys (5.9)—the tallest bolted route in the U.S—in Mazama [North] is an all-day adventure. Trad / Alpine: Index [North] is the crown jewel for hard granite trad. Washington Pass [North] gives you Liberty Bell and Early Winters Spires in a jaw-dropping setting. Forbidden Peak [North] is not to be missed. The Enchantments' Prusik Peak [North] is alpine perfection—just be ready for a long approach. Pro Tip: Spring in Leavenworth is prime for dry rock before the summer heat; late summer is best for Washington Pass when snow's melted out.     Backpacking Tens of thousands of miles of trail mean you can wander here for a lifetime. Many popular zones require permits, so plan early or get creative. Our Hike, Sun, and Run Collection has the perfect layer for these classics. The Wonderland Trail [Central]: 93 miles around Rainier—this is a bucket list trip. If you can't snag a full loop permit through the lottery but have a flexible schedule, show up at the ranger station because they can usually sort you out with a custom itinerary. The PCT [North, Central, South]: Washington's stretch of the Pacific Crest Trail is varied and stunning. Goat Rocks Wilderness is a must-see section—especially the Knife's Edge. Hoh River Trail [North, West]: Flat and mossy for the first dozen miles, then turns alpine as you near Blue Glacier. Fall colors here are underrated. Sahale Glacier Camp [North]: One of the best one-night trips in the state. If the permits are gone, Cascade Pass still makes a killer day hike. The Enchantments [North]: Lottery permit odds are brutal—so many locals do it as a long day hike (almost 20 miles). The alpine lakes and mountain goats make every step worth it. Fire Lookouts [North/Central]: Hidden Lake, Park Butte, and Pilchuck are the classics. You can overnight in some if you're lucky enough to beat the crowds. Pro Tip: Check WTA trip reports and the local forecast before heading out.     Ski Resorts Underrated, storm-hammered, and way less flashy than the Rockies—which is exactly why we like them. Our Snow Collection is built for the variable weather and terrain of the PNW. Mt. Baker Ski Area [North]: Powder legend for a reason—most locals ride with a beacon/shovel/probe. If you're here in early February, check out the Legendary Baker Banked Slalom—it's the heart of the mountain's culture. Mission Ridge [North, East]: Sunny skies, dry snow, and wide-open terrain. Midweek powder days here are criminally empty. Stevens Pass [North]: Balanced mix of terrain with easy sidecountry access. Parking can be a pain on weekends—make a reservation and try to carpool. Summit at Snoqualmie / Alpental [Central/Seattle]: Close to Seattle, rowdy when it's deep. Alpental's back bowls are legendary. Summit West/East are where half the city learned to ski. Crystal Mountain [Central]: Best lift network in the state. The Northway area skis like mini backcountry laps. On clear days, the Rainier view from the top is ridiculous. White Pass [Central]: Family-friendly with surprising steeps if you know where to look. Midweek here feels like your own private mountain. Mt. Spokane [East]: Affordable, fun, and home to legit night skiing. Locals love it for good reason. Pro Tip: Weekends can be hectic. Early bird scores a parking spot, and reservations are required at a few of the busier resorts. Ready to Explore Our Home State? Washington’s mountains, volcanoes, and forests are full of paths waiting to be explored. With the right gear and a readiness for whatever the weather brings, you’ll find an adventure that’s all your own—whether exploring the sunny east side or wandering a misty coastal rainforest. Load up your car, grab your kit, and hit the road—your ultimate Washington trip is waiting. And when you get to Seattle, be sure to swing by our flagship store just south of the sports stadiums in SODO.

The tactical team is dedicated to developing products through the lens of the elite professional, focusing on solving the problems and engineering mission specific capabilities across all categories: handwear systems, apparel, and accessories.   It’s essential to have a product manager at OR who can leverage the full resources and expertise under the wider OR umbrella through the lens of the elite military end user. The smallest details can determine whether a solution meets operational demands or fails in the field. Today, we’re speaking with Adrian Pydych, Tactical Product Manager, to understand how he ensures every product is purpose-built for mission success.     Tell us a little bit about how you found your way into this industry.   After graduating from the University of Washington with a degree in Industrial and Systems Engineering, I started my career at Outdoor Research on the manufacturing side of the business, first supporting the manufacture and supply of surgical facemasks to the State of Washington during COVID, then transitioning into our cut and sew business making Berry Compliant gloves and other accessories for the DOD (Department of Defense).   I provided manufacturing engineering support for existing products, as well as helping design and develop new products to meet contract requirements and specific customer needs. This was my first experience in the product side of the business, and I found my engineering background really helped in creating technical product to solve our customer’s problems. I really loved it, and eventually was able to leverage the experience I have making product for military contract customers into our TAA compliant product line that we have continued expanding year over year.     How would you define the core value proposition of ORs Tactical side, and how do you align both design mentalities to maintain a consistent brand identity?  The Tactical side of OR combines the lessons learned in the mountains with lessons learned on the battlefield. We have always been connected to the needs of the core military end user that may be issued our gear, and that’s allowed us to incorporate real time feedback from guys on the ground doing this day in and day out, on a very quick timeline. Having the ability to leverage the manufacturing expertise and industry knowledge here at OR into something that also incorporates finely tuned details brought to us by end user feedback is what separates us.   It also means we can utilize that knowledge to create products with a somewhat broader appeal and use case, more accessible through retail channels. Regardless of the supply chain, my goal is to supply product solutions that keep all our customers protected and able to focus on their mission, in any environment.     How do you prioritize features for different mission profiles — e.g., arid vs. alpine environments, Kinetic vs. Static roles? We always strive to create products that perform well in a wide range of applications, but these performance characteristics will always have trade offs depending on the scenario. Understanding those tradeoffs and identifying the intended end use is key when selecting materials, features, and designs. We collect extensive user feedback and test the product in the field ourselves to determine what characteristics to more heavily favor. In extreme cold environments, staying warm means regulating the moisture your body outputs, so we consider the breathability of an insulated parka more so than the waterproofness from external moisture. On the flip side, if we were focusing on a more packable layer meant to be a emergency layer to take out only when needed, features like pockets and adjustable cuffs are convenient, but add bulk with the velcro, zippers, and additional fabric needed to construct them, so a packable shell could forgo those features to be more suited for its end use case.  We want to provide the pieces for somebody to build a kit suited to their own preferences and mission set.   You recently visited Norway, a key hub for extreme cold weather training, where you observed exercises and tested gear firsthand. Can you walk me through how you turn field testing feedback into actionable product changes?  My trip to Norway was a great way for me to A/B test product in the field and collect feedback from true military end users in real time. Spending a week where the temps ranged from -10F to -25F meant quickly identifying what works and what doesn’t in those environments. There’s a big difference between testing zipper pulls in the office, vs with a heavy pack, in the snow, with cold hands and limited visibility.    To action feedback from field testing, it's always good to have experienced the specific environments that end users are operating in, and what scenario they might be providing that feedback from. This makes it easy to identify the problem, potential solutions and how they will impact the user and product. In my zipper example, a larger zipper pull can solve the problem but so can eliminating the zipper pocket in favor of a buckle or snap closure, and it's my job to determine what solution is best.      OR is well known in the DOD for our gloves, how do you balance durability, packability/weight, Weather proofness, breathability and cost when designing tactical gloves?  There is no single solution that will work for every scenario, but this also works in our favor when balancing key performance characteristics. The intended end use of the glove will help determine which ones to weigh more heavily. For example, a combat glove will favor durability and breathability over weather proofness, and by nature of it’s more fitted design will also be lighter than a heavily insulated mitten. Cost is often one of our biggest challenges to balance. Creating high performance product means expensive materials, but we want to provide a product that isn’t out of reach of our core end users, which can ultimately be done with innovative design, material selection, and efficient manufacturing partners.   Taking it one step further into the government contracting world, OR works closely with the military procurement and SOF program offices — how do you manage compliance while still driving innovation?  The supply chain for contract product is more limited in the US, but we have some amazing fabric suppliers that are key to our material innovation, and our US factories are constantly improving their manufacturing resources, machines, and processes. We also take inspiration from our Outdoor product line for new features and designs to keep increasing performance and the user experience. We are always innovating, and it typically looks like small, continuous improvements rather than a huge change all at once. Our relationship with SOF program offices allows us to test innovative new product, features, and materials with elite end users, and that feedback loop and end user base has always helped both sides of OR to keep innovating.    What metrics do you use to measure success for a tactical product line?  Every time we get to sit down with end users or attend a tradeshow, men and women will tell us stories about how the OR gloves they were issued or bought saved them in the field. Those kinds of moments are music to my ears.     OR was started by Ron Gregg because a simple gaiter completely derailed his meticulously planned approach. It is often the smallest things that result in compounding issues across a battlespace. My goal is to provide customers with products that will keep them on mission in any environment. We want to remove the elements as a factor, allowing the end user to focus on the real task on hand. A successful tactical product line allows you to move faster, and further while remaining dry, warm, and comfortable without mishaps that could cause mission failure.       Okay, last question. What trends do you see shaping the future of the tactical outdoor gear industry?  There’s been a lot of innovations in the outdoor industry around sun protection and cooling treatments. These products make a significant difference in hot environments, keeping users cooler, drier, and less exposed to the sun. This will be a real benefit to tactical end users in the field for long periods of time, and I think we will see this trend move from outdoor into tactical product over the next few years.   >>> Explore Tactical

In 2024, Ali Becker and Mathieu Leblanc set out to tackle the freshly released Great Northern Bikepacking Route, now the world’s longest mapped off-road bikepacking route. We were honored to be able to equip these riders with some of the best OR gear to be worn throughout the thousands of miles of rugged terrain and unpredictable weather. Read on for the full story from the saddle. Spending one hundred and forty days pedaling across North America on the Great Northern Bikepacking Route, (GNBR) turned out to be a great way for myself and my partner, Mathieu, to put ourselves – as well as some of Outdoor Research’s finest adventure layers – to the test.  We began our two wheeled, off-road odyssey on May 18, 2024 at Mile Zero in Victoria, British Columbia bundled up from the ocean breeze in what would become our favorite, go-to layer for cool mornings, brisk afternoons and apres sunset hangs - the his and hers Ferrosi Anoraks. These amazing inventions are part jacket, part hoodie and pull over your head with effortless ease (even with a helmet on) and are smartly equipped with a zippered front stash pocket for storing everyday essentials like our Freewheel Leather Palm Bike Gloves and Alpine Onset Merino Beanies that we grab for chilly descents.      It wasn’t too long after leaving the Juan de Fuca Strait on our very first day that the dark clouds hovering over Southern Vancouver Island started to look menacing. We wisely grabbed our OR rain layers - I, the women's Aspire II Gore-Tex Rain Jacket and Aspire Gore-Tex Pants, and Mat the Stratoburst Stretch Rain Jacket and Stratoburst Stretch Rain Pants - and strapped them up to our handlebars for easy access. When the skies finally opened up and poured down upon us, it was such a quick transition to grab our waterproof gear and layer up. Both of our rain pants are wisely designed with separating side zippers that run the full length of the pant leg, so we could zip them open up from the bottom cuff and slide our legs inside without having to take off our bike shoes - a real bonus when you’re in a hurry to cover up.     Those sweet zippers also meant that when we started to warm up on the rainy ride, we could open up the top zipper for ventilation in order to avoid overheating, while still staying dry. And when the clouds finally moved along and the sun came back, we simply strapped our wet rain layers to our seat pack, or handlebar bag and they quickly dried out so we could tuck them back in our bags. Both the Aspire and Stratoburst layers pack down super small, taking up nominal space in our seat bags and are so lightweight that we hardly noticed them in our packs. Our rain layers got a lot of use on this ride, not only during the downpours, but as a way to keep us warm on cool, albeit dry descents, and a few times - they even doubled as snow pants.     Alongside our rain gear, we were extremely grateful for all of the warm layers we had packed - like the women's Alpine Onset Merino crew and leggings - and for Mat, the men's Freewheel Long Sleeved Jersey, men’s Ferrosi Joggers and the Alpine Onset Merino Beanie - all of which we donned beneath our waterproof layers as we pushed up and over one of the highest unpaved mountain passes in Canada in what felt like the dead of winter, or as we trudged through hours of waist deep snow along Alberta’s High Rockies Trail en route to Canmore. But it wasn’t all grim skies and frozen paths on our 14,000 km / 8700 mile bikepacking journey - although one hotel we treated ourselves to in Gravelbourg, Saskatchewan did get hit with a tornado and had the roof ripped off while we were waiting downstairs for our room to be ready.  More often than not, we had beautiful, sunshine-y days full of epic vistas and stunning horizon lines, and long stretches of hard packed, fast rolling gravel roads – the kind that make you feel that among the chaos of the world, Bob Marley was right – everything’s gonna be alright.      During the dog days of summer, we swam in our beloved quick-drying, riding layers - me, the women’s Astroman Short Sleeve Sun Shirt – which I got countless compliments on and the Zendo Shorts with a smart, stretchy waistband and deep side pockets that were handy for holding my wallet when I went into the grocery stores and cafes. Everyone wondered how I could look so cute, clean and sophisticated while grinding up the side of a gravel road in the sweltering heat – I chock it up to the thoughtful cuts and colourways of these pieces, as well as the Astroman Short sleeved shirts AirVent technology on the back yoke, and the lightweight, super breathable material that also has SPF sun protection! Mat wore his Swift Lite Shorts with a 5” inseam day in and day out - with the exception of sleeping - from the first day of our ride, right through to the end. He cycled, swam, worked out (yes, cycling isn’t enough of a workout for him!) and went to dinner in these shorts. Even though the shorts fabric is so lightweight – making it astoundingly quick to dry – it held up to the constant friction on his leather saddle and they are still going strong today! As someone who loves variety in his wardrobe - Mat swapped between the men’s ActiveIce Spectrum Sun T-Shirt, the Freewheel Long Sleeved Jersey and the Astroman Short Sleeve Sun Shirt - all of which he loved for different reasons. The Astroman was perfect for those really warm days when you want to stay cool and be covered from the sun – plus it’s just so classy that it doubled as a dress shirt at a wedding we attended midway through our ride!  The ActiveIce Spectrum Sun T-Shirt was great for those cooler starts, but also performed well in the heat. The deep red colourway also added a layer of visibility for any stretches we had to cycle on busy roads giving us some added peace of mind.  The Freewheel Long Sleeve Jersey was his go-to for a breathable, moisture wicking baselayer when the temperatures dropped - especially as we pushed into the fall, and made for a great layer to wear under his rain jacket to protect the membrane from absorbing oils and sweat from his skin.     Being that the Great Northern Bikepacking Route was hot off the press in January 2024, we got the chance to be two of the first three people to ride the entire length of what is currently the longest, mapped, off-road bikepacking route in the world – ending at the most easterly point of North America at Cape Spear, Newfoundland on October 3, 2024. Along the way, we were in contact with GNBR route creator Matt Kadey – sending updates, feedback, plotting new points of interest, but mostly just sending him kudos for putting together such an incredible bikepacking route that took us to some really beautiful places and connected us with some really amazing people.     The GNBR traverses 10 Canadian provinces and 3 United States, with over 120,000 m (393 000 feet) in elevation, all while remaining predominately off-road – stitching together forest service roads, deactivated double tracks, flowy singletracks, pre-existing bikepacking routes, loose and chunky gravel roads, rock slabs, ATV tracks and some super smooth sailing, quiet paved connectors to make it all work.  Of course, all this time spent in the saddle is hard on gear – no matter how well you try to maintain it, but I must say that each and every one of our OR layers stood up to the relentless battering that the elements and the GNBR threw at it – and came out the other side looking pretty damn fresh. As for us, well, we did pretty good ourselves. >> Shop Sun Protection >> Shop Freewheel Mountain Bike Collection >> Shop New Arrivals